What's The Best Time To Apply 2-4-D Herbicide To Lawn (2024)

Jump to:

Having problems controlling broadleaf weeds on your lawn?

2-4-D-based herbicides (also known by their scientific name, dichlorophenoxyacetic acid) can help.

In fact, it’s been used for all types of turf since the 1940s. But what’s the best time to apply it?

The best time to apply herbicides, including 2-4-D, is when:

  1. The temperature is under 90 degrees
  2. Wind speeds are low (under 10 mph)
  3. Check on the moisture levels of your yard
  4. Rain forecast is absent for at least 24 hours

While these are just general guidelines, there are some 2-4-D-specific requirements to consider.

Best Conditions for Optimum 2-4-D Results

What's The Best Time To Apply 2-4-D Herbicide To Lawn (1)

Tap10/Shutterstock

Many people turn to2-4-D for its proven effectiveness and broad range of states (liquid, concentrate, dust, or granule). 2-4-D is popular in many places, including forestry sites, turfs, and lawns.

Some farmers even use it on fruit and vegetable crops or to modify the growth of citrus plants.However, for 2-4-D to be successful, you need to know precisely when to apply it; there are four main factors to consider.

1. Ideal Temperatures

You’ll want to spray your weeds when they’re actively growing. For best results, spray them when the temperature ranges from 60 to 85 °C.

Spraying at these temperatures improves the probability of weed eradication and ensures optimum herbicide absorption since evaporation rates are significantly lower.

If temperatures exceed 85 °C, the heat may cause your 2-4-D herbicide to vaporize, losing its efficacy. In most climates, mid-to-late spring is the best time to spray since weeds are growing and temperatures are still relatively cool.

2. Wind Speed

When able, choose a windless day. As with any herbicide, it’s worthless if it doesn’t stick to your lawn. Wind speeds under 10 mph are typically considered ideal for spraying.

Conversely, if the temperatures are on the higher end of the range we listed above, try to spray on a day with a slight breeze. This helps prevent the 2-4-D from evaporating immediately after being applied.

3. Moisture Levels In the Field

When applying 2-4-D, you should be very careful of the moisture levels in your yard. When high moisture levels are present, the increased water levels reduce the concentration of the herbicide, effectively watering it down and reducing its potency.

Also, if you have too much water in your soil, the chance of runoff increases. When possible, try to spray on a day when the soil is relatively dry, but still a little moist. If your soil is so dry that it’s cracking, you’re again prone to runoff occurring.

4. Rain Conditions

2-4-D herbicides must be allowed to dry for at least one day before being exposed to rain. This drying period ensures that adequate amounts of the herbicide are absorbed by your lawn’s root system.

When possible, try to spray on a day when there’s no rain forecast for the following few days.

As we stated above, you should also be careful if it’s just raining. While a little bit of moisture in your lawn is fine, if your grass is wet, it may cause runoff. Always make sure to allow ample time for the lawn to become completely dry.

Things to Consider

What's The Best Time To Apply 2-4-D Herbicide To Lawn (2)

NDE12019/Shutterstock

Just like any chemical, 2-4-D can be veryharmfulif mishandled, so keep the following in mind:

  • Suit up in protective gear before handling 2-4-D
  • Find a chemical-resistant apron to wear when mixing the herbicide
  • Use safety glasses, chemical-resistant footwear, and high socks during mixing
  • Spray the mixture at wind speeds lower than ten mph
  • Not all classes of grass endure 2-4-D herbicides
  • Don’t use it on flowering plants or food crops

Frequently Asked Questions

What's The Best Time To Apply 2-4-D Herbicide To Lawn (3)

Perhaps you have already applied 2-4-D once, but it didn’t work because the conditions weren’t ideal.

To make sure the next time goes better, we’ve rounded up some of the most common questions to ensure you don’t waste any more time or money.

Will 2-4-D Work In Cold Weather?

2-4-D is so popular because of its effectiveness in all temperatures. While weeds don’t easily grow in the cold, the herbicide is still effective, even in cold weather conditions.

However, during these conditions, its effectiveness is reduced. As such, we recommend spraying during the active periods of growing plants, which typically occurs at least 60℉.

Can You Spray 2-4-D at Night?

Nighttime application of 2-4-D is typically more efficient than application at dawn, as morning dew can dilute the mix.

But a midday application is considered the best time to spray. However, your region has high wind speeds during the day, spraying at night may be your best option.

Can You Spray 2-4-D After Mowing?

You should wait 2-3 days after mowing before spraying 2-4-D. Spraying immediately after mowing may reduce the efficiency of the product, as it won’t be as easily absorbed into the leaves.

Closing Thoughts

The best time to apply 2-4-D is when the weeds are small and aggressively sprouting, usually in early spring.

Spray on windless days when temperatures are below 90 °C, ideally 48 hours after mowing.

Please remember that this is a reactive chemical, and you should be very careful when spraying it.

What's The Best Time To Apply 2-4-D Herbicide To Lawn (2024)

FAQs

What's The Best Time To Apply 2-4-D Herbicide To Lawn? ›

For best results, apply this product as a water or oil spray during warm weather when young, succulent weeds or brush are actively growing. Application under drought conditions often will give poor results.

When to spray 2,4-D on lawn? ›

For best results, apply this product as a water or oil spray during warm weather when young, succulent weeds or brush are actively growing. Application under drought conditions often will give poor results.

How long does 2,4-D need before rain? ›

You would want to wait at least 24 hours after an application of the Amine 400 2,4-D herbicide before rain or irrigation occurs or resumes. 13 of 15 people found this answer helpful. Can Amine 400 2,4 - D Weed Killer be used on common lawns for broadleaf weed control w/o killing lawn?

What is the best temperature to apply 2,4-D? ›

Herbicides can be applied at temperatures of 40°F to 60°F, but weeds may be killed slowly. When the temperature is below 60°F, absorption of herbicides such as glyphosate and translocation of herbicides such as 2,4-D are lower compared with applications at higher temperature; therefore, they act slowly.

Can too much 2,4-D kill grass? ›

2,4-D kills broadleaf weeds but not most grasses. 2,4-D kills plants by causing the cells in the tissues that carry water and nutrients to divide and grow without stopping. Herbicides that act this way are called auxin-type herbicides.

How long should I wait to mow after spraying 2,4-D? ›

How long do you wait to cut the grass after a lawn treatment? You should wait to mow for 24 to 48 hours post treatment. This is because it takes at least 24 hours for broadleaf weed control to translocate throughout the vascular system of the plant.

What is the best time of day to spray grass killer? ›

Research shows PPO herbicides more effective at midday. Summary: Some herbicides are more effective when applied at noon compared to early morning or late evening applications, new research indicates. Researchers say the results have long-term implications for weed management.

How long does it take for 2,4-D to dry? ›

You should give Hi-Yield 2,4-D Selective Weed Killer a 24 hour drying period, but as long as the product had time to dry before you got rain it would still be effective. 29 of 30 people found this answer helpful. Will Hi-Yield 2, 4-D Selective Weed Killer kill Sand burs? 5 of 6 people found this answer helpful.

How long does 2,4-D last in the soil? ›

The half-life of 2,4-D in the environment is relatively short, averaging 10 days in soils and less than ten days in water, but can be significantly longer in cold, dry soils, or where the appropriate microbial community is not present to facilitate degradation.

How much 2,4-D do you use per gallon of water? ›

How much 2,4-d do I mix with a gallon of water to kill clover and dollar weed? You want to mix approx. 4 oz Hi-Yield 2, 4-D Selective Weed Killer per gallon of water over 1000 sq feet. Please be sure to consult the product label before application.

Will 2,4-D kill dandelions? ›

Dandelion, as well as clover, thistle and ground ivy, are broadleaf (non-grassy) weeds. The most effective broadleaf-killing herbicides for lawns are Trimec formulations. These products consist of a combination of three herbicides (2,4-D, mecoprop and dicamba).

Does 2,4-D kill clover? ›

Cool-season turfgrasses will tolerate all of the herbicides that control clover. The herbicide 2,4-D is not effective for clover control; it will injure the plant but does not control it.

Will 2,4-D turn grass yellow? ›

2,4-D is translocated within the plant tissues and also damages the root system of affected grasses, affecting nutrient and water uptake. Early symptoms may resemble those caused by root disease or drought injury and include yellowing and dieback of leaves followed in severe cases by death of the plants.

How soon can you spray 2,4-D on new grass? ›

Before applying broadleaf weed control to newly seeded grass, you must wait until the newly sprouted grass has been mowed three times or wait at least 30 days, whichever time frame is longer. If applied too soon after grass germination, broadleaf weed control will kill or weaken young seedlings.

How long after spraying 2,4-D is it safe for pets? ›

Any type of chemical can leave particles behind that may stick around for longer than you think. Studies show that even though most weed killer bottles say that you and your pets should keep off sprayed lawns for only 6 to 24 hours, chemical residue can linger on surfaces for up to 48 hours after application.

How soon can you graze after spraying 2,4-D? ›

2,4-D amine* 2, 4-dichlorophenoxy broadleaf weeds Do not apply later than 30 days prior to acetic acid hay harvest. Do not graze meat animals (several formulations) on treated areas within 3 days of slaughter. Do not graze dairy animals within 7 days of application.

What temperature should you not spray weeds at? ›

Volatility of these herbicides increases as temperature rise above 60°F and is greatest at temperatures above 90°F. Management: Avoid applying these herbicides when temperatures are over 90°F.

References

Top Articles
Latest Posts
Article information

Author: Mrs. Angelic Larkin

Last Updated:

Views: 6236

Rating: 4.7 / 5 (47 voted)

Reviews: 94% of readers found this page helpful

Author information

Name: Mrs. Angelic Larkin

Birthday: 1992-06-28

Address: Apt. 413 8275 Mueller Overpass, South Magnolia, IA 99527-6023

Phone: +6824704719725

Job: District Real-Estate Facilitator

Hobby: Letterboxing, Vacation, Poi, Homebrewing, Mountain biking, Slacklining, Cabaret

Introduction: My name is Mrs. Angelic Larkin, I am a cute, charming, funny, determined, inexpensive, joyous, cheerful person who loves writing and wants to share my knowledge and understanding with you.